Barend Gehrels
4652e56d40
[buffer][test] test tests with many points only in release mode
2015-02-28 13:06:49 +01:00
Barend Gehrels
32175d483b
[buffer][test] increase tolerance of tests added today, to support
...
slightly varying results on different compilers
2015-02-25 22:56:17 +01:00
Barend Gehrels
3a5e2c20c4
[buffer] improve performance for multi_point with many generated points
...
by now using monotonic sections and calculate turns over overlapping sections only
2015-02-25 17:50:25 +01:00
Barend Gehrels
845611e251
[buffer][test] add tests for multi-polygons with inner rings and large distances
...
Also tests are added where the generated deflated ring around an interior ring
is located exactly within another interior ring
2015-02-18 15:12:39 +01:00
Barend Gehrels
b0fdfc5d7a
[buffer] fix erroneous rings for deflated interior rings which are untouched
2015-02-18 15:10:06 +01:00
Barend Gehrels
2201ebf86e
[buffer] fix the case where a side was skipped because detected as equal, followed
...
by an end-cap. This caused further problems. Detection of empty sides is now delegated
to the strategy
2015-02-18 12:20:05 +01:00
Barend Gehrels
3c2a450742
[buffer][test] add testcase for crossing multi-linestring
...
which was fixed already by previous commit (flat-ends)
2015-02-18 10:32:04 +01:00
Barend Gehrels
6c5cb48211
[buffer][fix] avoid false detection of turn in piece: turns cannot be located
...
in flat end pieces or in concave pieces
2015-02-18 10:20:26 +01:00
Adam Wulkiewicz
bd6e07797f
[test][buffer] Add tests for Areal and negative distance (failing for polygon with hole and big distance).
2015-02-18 00:35:29 +01:00
Adam Wulkiewicz
7f9b2f86f8
[test][buffer] Add Linear cases failing for end_flat and big distance.
2015-02-17 21:15:39 +01:00
Adam Wulkiewicz
543acca243
[test][buffer] Add MultiLinestring tests causing an assertion failure.
2015-02-16 18:13:19 +01:00
Barend Gehrels
729c5d2c37
Minor: fix spacing according to conventions
2015-02-13 13:25:59 +01:00
Barend Gehrels
3afb29f41e
[buffer][fix] Assure first point of next piece equals last point of previous piece
2015-02-13 12:59:14 +01:00
Barend Gehrels
d21145952f
[buffer][fix] make sure that, per ring, closing point is the starting point.
...
It can be off due to numerical instability
2015-02-13 12:23:58 +01:00
Adam Wulkiewicz
aff82800c4
[test][algorithms] Use BOOST_GEOMETRY_CONDITION macro for constant conditions.
2015-02-11 15:53:50 +01:00
Barend Gehrels
2f0b9d05bd
[buffer][test] split multi_point_buffer test into normal unit test
...
and robustness test (growth)
2015-01-28 10:47:01 +01:00
Barend Gehrels
5c9c899974
[test] Increase tolerance slightly for parcel3 (buffer) and geos_1 (intersection)
...
to let it pass in MSVC 14
2015-01-21 23:19:38 +01:00
Barend Gehrels
11fbe1e453
[buffer][test] create optionally a zoomed-in view to be able to better inspect error-cases
2014-12-31 14:22:49 +01:00
Barend Gehrels
a19e818042
[buffer][test] add check for is_valid (now optional)
2014-12-31 13:51:09 +01:00
Barend Gehrels
fff81f33ed
[buffer][test] fix expectation of just added testcase
2014-12-31 13:21:56 +01:00
Barend Gehrels
a0c1fbaf72
[buffer][test] Simplify code using multi-polygon instead of vector
2014-12-31 13:20:28 +01:00
Barend Gehrels
5d1c9525a3
[buffer][test] option to specify tolerance for custom strategies
2014-12-31 13:13:03 +01:00
Barend Gehrels
d1f2878e11
[buffer][test] add failing case
2014-12-31 13:10:01 +01:00
Barend Gehrels
bbc8c605e6
[buffer] add specific robust bounding box for offsetted part.
...
This gains in some cases more than 10% performance
This gives two small changes in expected areas for country buffer deflate-5, which are not
visible and not detectable using other tools (spent quite some time to try)
2014-11-23 12:25:48 +01:00
Barend Gehrels
6be98196ed
[buffer] Piece visitor, remove unused types and we still need to check on geometry_code
2014-11-22 14:32:20 +01:00
Barend Gehrels
fc2652323b
[buffer] refactor analysis of piece into shorter and slightly more efficient (few %) code.
...
It is now one function. In later commits we will extend this by checking helper
segments separately, which should also be more efficient.
It changes one test-case, probably because ofn ear_offsetted. The change is not visible
and the result is probably more correct. SQL Server reports this polygon as invalid.
2014-11-22 12:50:31 +01:00
Barend Gehrels
0667c87e1d
[buffer][test] added unit test using large country multi_polygons
...
This one is not enabled by default.
Aimes-test is no enabled by default
2014-11-12 14:07:19 +01:00
Barend Gehrels
9a9e16f936
[buffer] major fix: we now create concave helper-pieces differently
...
In the past there was one with a straight line going from one piece to the next.
Now there are two, going from one piece to the point on the geometry, and the
second going from the point on the geomety to the next piece.
They are now zero-volume.
They fix:
1) crossings of sides with flat-ends (unit-test cases curve, field_sprayer, bend_near_start)
2) joins with limited number of points (unit-test cases concave_b_rough, italy_part, nl_part)
3) joins with large distances
4) many self-intersections on remaining aimes-cases
2014-11-12 13:59:29 +01:00
Barend Gehrels
4ad1abe80f
[buffer][test] enhance display of pieces
2014-11-12 13:39:51 +01:00
Barend Gehrels
95583233e7
[buffer] polygon add tests, which are partly failing
2014-11-09 14:29:39 +01:00
Barend Gehrels
a34e408ade
[buffer][test] disable failing test for CCW
2014-11-09 12:18:17 +01:00
Barend Gehrels
0be9f2dfca
[test][buffer] test symmetric distance strategy too, if right distance
...
is not specified. This tests the fix in last commit, already merged to master (for 1.57)
2014-10-29 22:54:06 +01:00
Barend Gehrels
26da077654
[test][buffer] enhance SVG display for deflate, with pieces displayed
2014-10-29 17:27:25 +01:00
Barend Gehrels
254999addd
[buffer] Fix case for square with buffer-distance = half the size, IP's
...
are on border of original and should be discarded for both inflate/deflate
This fixes the cases added to unit tests before
2014-10-29 17:26:43 +01:00
Barend Gehrels
c8af337ad7
[test][buffer] remove _neg suffix from test-case-name, it is done automatically
2014-10-29 12:50:48 +01:00
Barend Gehrels
79b944483d
[test][buffer] add simplex square for failing deflate case
2014-10-29 12:50:20 +01:00
Barend Gehrels
32d5c78623
[test][buffer] add deflate test for multi, including failing for distance=half of square
2014-10-29 12:35:41 +01:00
Barend Gehrels
b98c653335
[test][buffer] test ccw by default
2014-10-29 12:15:15 +01:00
Barend Gehrels
39c149ed22
[test][buffer] more deflation tests and move order
2014-10-29 12:14:43 +01:00
Barend Gehrels
761fc9f8b1
[test][buffer] uncommented deflated indentation tests, which pass now
2014-10-29 12:00:01 +01:00
Barend Gehrels
8e6268c50e
[test][buffer] enhance svg display for test results and deflated polygons.
...
By default pieces/turns are non visible now
2014-10-29 11:52:25 +01:00
Barend Gehrels
cef05d3bf2
[buffer][test] remove default values for new tests
2014-10-29 11:16:42 +01:00
Barend Gehrels
4a7c63fb17
[buffer][test] add custom-strategy version and test scenario which did round-join buffer fail
2014-10-29 11:16:11 +01:00
Adam Wulkiewicz
c411f2bdb3
[test][buffer] Add test cases for Polygon.
2014-10-28 15:07:36 +01:00
Adam Wulkiewicz
3500cc4355
[test][buffer] Add CCW test polygons (not tested yet).
2014-10-28 13:49:08 +01:00
Barend Gehrels
a5b9cfe0bc
[buffer][fix] fix for open input of 3 points
2014-10-24 19:39:01 +02:00
Barend Gehrels
0f72af95f0
[buffer] fix simplify which should work on input ringtype
...
and added unit test which tests different input/output types w.r.t. point order
(different point types are not yet supported)
2014-10-24 15:52:05 +02:00
Barend Gehrels
ffd3cd1e3d
[buffer][test] fix ccw suffix which should use output geometry
2014-10-24 15:33:03 +02:00
Barend Gehrels
6f09c5fd98
[buffer][test] test counter clockwise output for (multi)linestrings / points
2014-10-24 15:17:05 +02:00
Barend Gehrels
bd4de457d8
[buffer][fix] fixes counter clockwise polygons
2014-10-24 15:02:55 +02:00
